Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.


Whenever you post in our forum, always check back to see if you've got a reply! or Check your email to see if your topic got a reply.

➜ Please Note: We have Zero "0" tolerance to Spam!

Tecno ca6 dead after flashing with a bad firmware, solved

Here are sections for success stories in flashing firmware!
Octoplus FRP Tool
Post Reply
Sagio Kopp
Registered User
Posts: 1
Joined: Sat Sep 08, 2018 11:02 am
Location: Democratic Republic of the Congo
Has thanked: 0
Been thanked: 0
Status: Offline
Congo Democratic Republic

Tecno ca6 dead after flashing with a bad firmware, solved

#1

Post by Sagio Kopp » Sat Feb 09, 2019 4:45 am

This is the successful story of how I saved my Tecno ca6 dead after flash with a bad firmware. to save a dead phone it feels good to have:
1. DA file corresponding to the model of your phone.
2. Aftersales downloader tool.
3. Factory signed firmware.

Procedure: Extract all the file mentioned above, open the file containing the DA file and copy your download agent, now go to aftersales download tool, in the folder MTKDA_FP and MTKDA_SP you delete the DA that you go find there and copy yours in this two folder after launch the SWD Aftersales application, once the tool is launched you will see a case on the right and click on tool and browse the folder located your firmware and select the scatter file, after choose the option *format all and download*. Then confirmed. After confirmation, always at the top right press start and wait for the tool to analyze the firmware. If analysis finishes now take your phone, press the volume up + down key and plug USB, if the DA connection ends, you can release the volume key but always leave usb plugged in until the download is complete.
Once the full download unplug usb and turn on the phone.
Done



Post Reply

Return to “Flashing Firmware”