Page 1 of 1

NEED STYLO K7 FIRMWARE

Posted: Thu Aug 08, 2019 3:43 pm
by Edward Musonda
Hi guys anyone to help me with STYLO K7 firmware it has SPD CPU TYPE

Re: NEED STYLO K7 FIRMWARE

Posted: Thu Aug 08, 2019 4:01 pm
by Exclusive
Kindly provide few more details about this device, like build number, chipset (you provided only the CPU which you said is SPD) etc...

Read Firmware Request Policy!

Re: NEED STYLO K7 FIRMWARE

Posted: Thu Aug 08, 2019 4:26 pm
by Edward Musonda
HERE IS THE READED INFO WIT CM2

Device Brand : Stylo
Device Model : sp7731g_1h10
Device CPU : sp7731gea_hdr
Device IntName : si7537sc
Device Version : 6.0
Device Compile : 4 Apr 2018 08:24:00
Device Project : Stylo-K7_v04_20180404
Device ExtInfo : Stylo K7

Re: NEED STYLO K7 FIRMWARE

Posted: Thu Aug 08, 2019 4:57 pm
by Exclusive
Edward Musonda wrote:
Thu Aug 08, 2019 4:26 pm
HERE IS THE READED INFO WIT CM2

Device Brand : Stylo
Device Model : sp7731g_1h10
Device CPU : sp7731gea_hdr
Device IntName : si7537sc
Device Version : 6.0
Device Compile : 4 Apr 2018 08:24:00
Device Project : Stylo-K7_v04_20180404
Device ExtInfo : Stylo K7
Thank you for providing the above info. If I may ask, what is the issue with the device?

Re: NEED STYLO K7 FIRMWARE

Posted: Fri Aug 09, 2019 6:03 pm
by Edward Musonda
It is stuck on logo that's why I need the firmware to flash it

Re: NEED STYLO K7 FIRMWARE

Posted: Fri Aug 09, 2019 10:32 pm
by Exclusive
The above-requested firmware is currently unavailable online as it is an uncommon brand. Have you tried a hard reset?

Re: NEED STYLO K7 FIRMWARE

Posted: Sat Aug 10, 2019 2:46 pm
by Edward Musonda
Have tried hard resetting didn't solve it

Re: NEED STYLO K7 FIRMWARE

Posted: Sat Aug 10, 2019 3:30 pm
by Exclusive
Edward Musonda wrote:
Sat Aug 10, 2019 2:46 pm
Have tried hard resetting didn't solve it
Since the firmware of this device is still unavailable, kindly get the same model of the device (a working one), take a backup of the firmware and flash it to your device.

Re: NEED STYLO K7 FIRMWARE

Posted: Thu Aug 15, 2019 10:13 am
by Edward Musonda
I would have done the same if I had the working one, now both of the ones I have has the same problem.