Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

We have deleted all newly created accounts that are yet to be verified! 📢

INVENS E11 FIRMWARE IN NEED

This section is strictly for Firmware request.
Advertise
Forum rules
READ: GSM-Tutors Forum Firmware Request Policy
Post Reply
User avatar

Topic Author
Herfolttech
Senior Member
Posts: 30
Joined: Fri Jun 15, 2018 8:45 pm
Location: Benin
Has thanked: 1 time
Been thanked: 2 times
Status: Offline
Benin

INVENS E11 FIRMWARE IN NEED

#1

Unread post by Herfolttech » Sat Jun 22, 2019 1:46 am

Hi Members
INVENS E11 Firmware in need
I have hang logo issue.
During my research I found that INVENS EAGER E11. INVENS EAGER E11 and INVENS E11 are not the same model
Thanks in advance
INVENS E11 BACK FACE SNAP.jpg
INVENS E11 BACK FACE SNAP.jpg (55.7 KiB) Viewed 752 times

Herfolt Tech From Benin Republic
Whatsapp: (+229)66037064
Top
User avatar

Exclusive
Moderator
Moderator
Posts: 392
Joined: Fri Jun 08, 2018 12:37 pm
Location: Nigeria
Has thanked: 1 time
Been thanked: 24 times
Status: Offline
Nigeria

Re: INVENS E11 FIRMWARE IN NEED

#2

Unread post by Exclusive » Sat Jun 22, 2019 10:43 am

The model name is Eager, while the model number is E11. Have you tried it? If you're are not fully convinced please post your build number.

Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. Image
Top
User avatar

Topic Author
Herfolttech
Senior Member
Posts: 30
Joined: Fri Jun 15, 2018 8:45 pm
Location: Benin
Has thanked: 1 time
Been thanked: 2 times
Status: Offline
Benin

Re: INVENS E11 FIRMWARE IN NEED

#3

Unread post by Herfolttech » Sat Jun 22, 2019 11:42 am

Thanks for your reply.
I had already tried the flash with AD198_Eager_7.0_Invens_Eager_Android_7.0_V01_20180202_Eager.pac file.
But I have the following error Operation failed
Invens eager e11 error during the flash by herfolttech.JPG
Invens eager e11 error during the flash by herfolttech.JPG (58.34 KiB) Viewed 740 times

Herfolt Tech From Benin Republic
Whatsapp: (+229)66037064
Top
User avatar

Exclusive
Moderator
Moderator
Posts: 392
Joined: Fri Jun 08, 2018 12:37 pm
Location: Nigeria
Has thanked: 1 time
Been thanked: 24 times
Status: Offline
Nigeria

Re: INVENS E11 FIRMWARE IN NEED

#4

Unread post by Exclusive » Sat Jun 22, 2019 2:36 pm

1, Use SPD Research Download Tool v4.0001
2. Load the PAC file
3. Click on the Settings icon (Gear icon)
4. On the Download Settings (Main page), Uncheck Repartition and click Ok. Flash the device and post result.

Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. Image
Top

obie32
Junior Member
Junior Member
Posts: 13
Joined: Thu Dec 06, 2018 5:35 pm
Location: Malawi
Been thanked: 1 time
Status: Offline
Malawi

Re: INVENS E11 FIRMWARE IN NEED

#5

Unread post by obie32 » Sun Feb 14, 2021 9:11 pm

Me too i flashed with eager e11 now only vibrates

Top


Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Firmware Request”