Page 1 of 1
INVENS E11 FIRMWARE IN NEED
Posted: Sat Jun 22, 2019 1:46 am
by Herfolttech
Hi Members
INVENS E11 Firmware in need
I have hang logo issue.
During my research I found that INVENS EAGER E11. INVENS EAGER E11 and INVENS E11 are not the same model
Thanks in advance
- INVENS E11 BACK FACE SNAP.jpg (55.7KiB)Viewed 4610 times
Re: INVENS E11 FIRMWARE IN NEED
Posted: Sat Jun 22, 2019 10:43 am
by Exclusive
The model name is Eager, while the model number is E11. Have you tried it? If you're are not fully convinced please post your build number.
Re: INVENS E11 FIRMWARE IN NEED
Posted: Sat Jun 22, 2019 11:42 am
by Herfolttech
Thanks for your reply.
I had already tried the flash with AD198_Eager_7.0_Invens_Eager_Android_7.0_V01_20180202_Eager.pac file.
But I have the following error
Operation failed
- Invens eager e11 error during the flash by herfolttech.JPG (58.34KiB)Viewed 4598 times
Re: INVENS E11 FIRMWARE IN NEED
Posted: Sat Jun 22, 2019 2:36 pm
by Exclusive
1, Use SPD Research Download Tool v4.0001
2. Load the PAC file
3. Click on the Settings icon (Gear icon)
4. On the Download Settings (Main page), Uncheck Repartition and click Ok. Flash the device and post result.
Re: INVENS E11 FIRMWARE IN NEED
Posted: Sun Feb 14, 2021 9:11 pm
by obie32
Me too i flashed with eager e11 now only vibrates