Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

Have a Question? Ask Here! 📢 | Get the latest ICCID: here - iOS 5.0.2 or Later, AT&T & All Carriers Working!
User avatar

Topic Author
RomShillzz
Administrator
Administrator
Posts: 1231
Joined: Fri Jun 15, 2018 12:00 pm
Location: Nigeria
Donate: Image
Has thanked: 6 times
Been thanked: 97 times
Status: Offline
Contact:
Nigeria

Tecno POP 4 Pro BC3 FRP Done by CM2!

#1

Unread post by RomShillzz » Tue Sep 21, 2021 10:35 am

Card found : 1xxxxxxC , v0149
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.25

Load IDBase v616218 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.25 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM21)
MODE : BOOTROM
PORT : 21
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 5E396A0685E4E7AEB9FAB867BCCF0349
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Disabled
BROM : SOCID : 9D4011A9E75AE89B19163FE41824154638DE6A3BBFAE50DFA5AE98BF34ADB537
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_tecno_bc3.bin
EMI : CNT : 0007
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: CID : 700100464D41454538231D9BDC67970D
EMMC: VEN : KINGSTON : OEM : 0 : ID : 464D41454538
EMMC: VEN : KINGSTON : FMAEE8
EMMC: SNN : 496753767 ( 0x1D9BDC67) , MF : 9/2020
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A8000000 [ 14.63 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : D32D77AC2259ECBFA4C7F012F9F78532

DA : USB : HIGH-SPEED

Boot done!

Product Brand : TECNO
Product Device : TECNO-BC3
Product Model : TECNO BC3
Product Name : BC3-OP
Patch Level : QP1A.190711.020
Display ID : BC3-BC3ABC-QGo-OP-210208V026
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-01-05
Build Time : 08.02.2021
Product Info : BC3-OP
Product Board : tecno_bc3
Board Platform : mt6739
Product Manfct : TECNO MOBILE LIMITED

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 14 ]
Backup path : Backup\MT6739__D32D77AC2259ECBFA4C7F012F9F78532\
Backup done!


STORAGE : LifeStatus : eMMC : OK!

Done!
Elapsed: 00:00:46

Operation : Reset Settings/Format FS [ v2.25 ]
Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM21)
MODE : BOOTROM
PORT : 21
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 5E396A0685E4E7AEB9FAB867BCCF0349
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2112 | Manual : Disabled
BROM : SOCID : 9D4011A9E75AE89B19163FE41824154638DE6A3BBFAE50DFA5AE98BF34ADB537
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_tecno_bc3.bin
EMI : CNT : 0007
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: CID : 700100464D41454538231D9BDC67970D
EMMC: VEN : KINGSTON : OEM : 0 : ID : 464D41454538
EMMC: VEN : KINGSTON : FMAEE8
EMMC: SNN : 496753767 ( 0x1D9BDC67) , MF : 9/2020
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A8000000 [ 14.63 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : D32D77AC2259ECBFA4C7F012F9F78532

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:43

Reconnect Power/Cable!

Connect the device with Vol - (down) button. (Hold Vol - button, then connect the device to your Computer)

tecno-pop-4-pro-bc3-frp-cm2-(a).png
tecno-pop-4-pro-bc3-frp-cm2-(a).png (58.63 KiB) Viewed 124 times

tecno-pop-4-pro-bc3-frp-cm2-(b).png
tecno-pop-4-pro-bc3-frp-cm2-(b).png (53.65 KiB) Viewed 124 times



Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. | https://romshillzz.net


Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Factory Reset Protection (FRP) Bypass / Removal”