GSM-Tutors

Have you tried unlocking/formatting a Coolsand device using Miracle Box and at the process you got an error ID: 200 (Connect to Mobile phone error. ID: 200)? Here is the solution on how to fix Coolsand Error ID: 200.
Although all Coolsand error can be solved using Infinity Box Dongle Chines Miracle 2 (CM2) But this is for Miracle Box users.

WARNING!
Flashing/Unlocking/Formatting will erase all of your data
All described operations you are doing at your own risk.

Requirements:

• Coolsand (RDA) Driver (Install from Miracle Box Driver Installation v1.00): viewtopic.php?f=59&t=675

• Miracle Box Crack v2.58: [ Please, Login to view this link]

How To (Steps):
After getting all the requirements, follow this tutorial I have made on How To Flash & Unlock Coolsand Feature Phones (Basic Phones). After following the above tutorial and you encounter this error Connect to Mobile phone error. ID: 200, do the following:

• Install the Coolsand (RDA) driver provided above.

• After installation, Restart your Computer (Recommended but not Compulsory).

• Launch Miracle Box (Tested on the Miracle Box Crack version provided above).

• Follow the tutorial (How To Flash & Unlock Coolsand Feature Phones (Basic Phones)) again, this time around when it shows the error, click on the Start button, disconnect device (but don't allow the deceive to switch off or to disconnect from the "Open USB Download" Mode) and reconnect immediately.

Note: Time interval for disconnecting and reconnecting the device shouldn't go beyond 2-3 secs, so you have to be fast on this.

After following the above steps accordingly, you should be able to get a successful result!





If this worked for you, use the thanks button!

You are the BEST ever... this WORKED 100000....% Tested by SirReal Gsm Developer