Page 1 of 1

How To Erase Infinix X608 Firmware Using Miracle Box

Posted: Fri Apr 19, 2019 1:43 am
by MAGASTORY
In this tutorial we will see how to erase the firmware on infinix X608 using miracle box.

To start. make sure that the Qualcomm drivers are installed in your machine if it is not the case you will find them [ Please, Login to view this link]

After installing the drivers put the phone in Edl Mode by shorting the two points the following picture will guide you.

edl test point x608.PNG
edl test point x608.PNG (138.22KiB)Viewed 7651 times

After selecting the port then select Read partitions wait a few seconds on the dashboard you will see the different partitions of the phone

Read Partition.PNG
Read Partition.PNG (60.04KiB)Viewed 7651 times

Then tick all the partitions then tick wipe selected

Erase Partition.PNG
Erase Partition.PNG (57.28KiB)Viewed 7651 times

ENJOY IT!

How To Flash Infinix X608: viewtopic.php?f=4&t=693

Re: How To Erase Infinix X608 Firmware Using Miracle Box

Posted: Thu Aug 06, 2020 2:58 am
by RaphaelTino
Please I need link to download miracle crack