Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

We are here for you! Please Ask a Question 📢

How To Erase Infinix X608 Firmware Using Miracle Box

Here are sections for success stories in flashing firmware!
Junior Member
Posts: 4
Joined: Sun Jun 10, 2018 4:54 am
Location: Cameroon
Has thanked: 0
Been thanked: 0
Status: Offline

How To Erase Infinix X608 Firmware Using Miracle Box


Unread post by MAGASTORY » Fri Apr 19, 2019 1:43 am

In this tutorial we will see how to erase the firmware on infinix X608 using miracle box.

To start. make sure that the Qualcomm drivers are installed in your machine if it is not the case you will find them [ Please, Login to view this link]

After installing the drivers put the phone in Edl Mode by shorting the two points the following picture will guide you.

edl test point x608.PNG
edl test point x608.PNG (138.22 KiB) Viewed 513 times

After selecting the port then select Read partitions wait a few seconds on the dashboard you will see the different partitions of the phone

Read Partition.PNG
Read Partition.PNG (60.04 KiB) Viewed 513 times

Then tick all the partitions then tick wipe selected

Erase Partition.PNG
Erase Partition.PNG (57.28 KiB) Viewed 513 times


How To Flash Infinix X608: viewtopic.php?f=4&t=693

Post Reply
  • Similar Topics
    Last post

Return to “Flashing Firmware”