How to Change iPhone Location | Spoof GPS Location on iPhone with Tenoshare iAnyGo (iOS 16 Supported)
How To Flash/Load BlackBerry Devices (Install BlackBerry OS)
Forum rules
READ: GSM-Tutors Forum-Wide Rules and Regulations
READ: GSM-Tutors Forum-Wide Rules and Regulations
-
- Administrator
- Posts:1301
- Joined:Fri Jun 15, 2018 12:00 pm
- Location:Nigeria
- Donate:
- Has thanked: 6 times
- Been thanked: 104 times
- Status:Offline
- Contact:
This is a tutorial on how to Flash BlackBerry Devices.
WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.
Flashing An Autoloader/Fast Installer
Note: The below steps can also be carried out on BlackBerry 10 (BlackBerry 10 Devices)
Requirements:
After getting all the requirements, follow the rest of the steps below.
For stubborn BlackBerry devices like BlackBerry 9900
*Launch Step-1 NUKE_My-Phone the connect blackberry device. When the process is completed (the process is complete when the red light on the device goes off)
*Launch Step_2 Wipe_My_Phone then connect blackberry device. When the process is completed
*Launch the autoloader then connect blackberry device and wait for the process to complete.
Step 1:
Download and install the BlackBerry Link or BlackBerry Desktop.
Step 2:
Navigate to the Autoloader download location.
Step 3:
Double click on the Autoloader.
Step 4:
Connect the BlackBerry device to your Computer using a USB Cable (with or without inserting Battery).
Step 5:
Wait for the Autoloader to detect the device.
Step 6:
Once the device has been detected, Patiently wait for the process to complete to 100% until it shows Done.
Follow the screenshots below or read the tutorials above
Flashing With Software Installer (AppLoader)
Note: The below steps cannot be carried out on BlackBerry with OS 10 (BlackBerry 10 Devices)
How To (Steps):
After getting all the requirements, follow the rest of the steps below.
Make sure you have already installed the software of the BlackBerry device you want to flash and don't forget to delete VENDOR in the Apploader folder before loading the Software (OS) into the BlackBerry device.
➜ Learn how to locate AppLoader and delete VENDOR from here:
Step 1:
Launch Loader from the AppLoader folder.
Step 2:
Connect the BlackBerry device to your Computer using a USB Cable >> Plug USB >> Insert baterry.
Step 3:
Wait for the loader to detect the device.
Step 4:
Once the device has been detected, Click Next.
Step 5:
Select all the necessary applications which you would like to be installed on your device but don't select Password Keeper (else the device gets locked after flashing).
Step 6:
Click Next
Step 7:
Click Finish
Step 8:
Patiently wait for the OS to load. Once the OS has been successfully loaded to the BlackBerry device, exit the loader.
Follow the screenshots below or read the tutorials above
If this worked for you, use the thanks button!
WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.
Flashing An Autoloader/Fast Installer
Note: The below steps can also be carried out on BlackBerry 10 (BlackBerry 10 Devices)
Requirements:
- BlackBerry Desktop: [ Please, Login to view this link] or BlackBerry Blend: [ Please, Login to view this link] or BlacBerry Link: [ Please, Login to view this link]
- BlackBerry Firmware: viewforum.php?f=277
After getting all the requirements, follow the rest of the steps below.
For stubborn BlackBerry devices like BlackBerry 9900
*Launch Step-1 NUKE_My-Phone the connect blackberry device. When the process is completed (the process is complete when the red light on the device goes off)
*Launch Step_2 Wipe_My_Phone then connect blackberry device. When the process is completed
*Launch the autoloader then connect blackberry device and wait for the process to complete.
Step 1:
Download and install the BlackBerry Link or BlackBerry Desktop.
Step 2:
Navigate to the Autoloader download location.
Step 3:
Double click on the Autoloader.
Step 4:
Connect the BlackBerry device to your Computer using a USB Cable (with or without inserting Battery).
Step 5:
Wait for the Autoloader to detect the device.
Step 6:
Once the device has been detected, Patiently wait for the process to complete to 100% until it shows Done.
Follow the screenshots below or read the tutorials above
Flashing With Software Installer (AppLoader)
Note: The below steps cannot be carried out on BlackBerry with OS 10 (BlackBerry 10 Devices)
How To (Steps):
After getting all the requirements, follow the rest of the steps below.
Make sure you have already installed the software of the BlackBerry device you want to flash and don't forget to delete VENDOR in the Apploader folder before loading the Software (OS) into the BlackBerry device.
➜ Learn how to locate AppLoader and delete VENDOR from here:
Step 1:
Launch Loader from the AppLoader folder.
Step 2:
Connect the BlackBerry device to your Computer using a USB Cable >> Plug USB >> Insert baterry.
Step 3:
Wait for the loader to detect the device.
Step 4:
Once the device has been detected, Click Next.
Step 5:
Select all the necessary applications which you would like to be installed on your device but don't select Password Keeper (else the device gets locked after flashing).
Step 6:
Click Next
Step 7:
Click Finish
Step 8:
Patiently wait for the OS to load. Once the OS has been successfully loaded to the BlackBerry device, exit the loader.
Follow the screenshots below or read the tutorials above
If this worked for you, use the thanks button!
Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. | https://romshillzz.net
Avoid Spams in the forum to prevent banning the offending account. | https://romshillzz.net
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 3209 Views
-
Last post byExclusive
-
- 2 Replies
- 11858 Views
-
Last post byRomShillzz
-
- 7 Replies
- 15385 Views
-
Last post byExclusive
-
- 1 Replies
- 8264 Views
-
Last post by[email protected]
-
- 0 Replies
- 3060 Views
-
Last post byInfinity-Box