Page 1 of 1

Tecno ca6 dead after flashing with a bad firmware, solved

Posted: Sat Feb 09, 2019 4:45 am
by Sagio Kopp
This is the successful story of how I saved my Tecno ca6 dead after flash with a bad firmware. to save a dead phone it feels good to have:
1. DA file corresponding to the model of your phone.
2. Aftersales downloader tool.
3. Factory signed firmware.

Procedure: Extract all the file mentioned above, open the file containing the DA file and copy your download agent, now go to aftersales download tool, in the folder MTKDA_FP and MTKDA_SP you delete the DA that you go find there and copy yours in this two folder after launch the SWD Aftersales application, once the tool is launched you will see a case on the right and click on tool and browse the folder located your firmware and select the scatter file, after choose the option *format all and download*. Then confirmed. After confirmation, always at the top right press start and wait for the tool to analyze the firmware. If analysis finishes now take your phone, press the volume up + down key and plug USB, if the DA connection ends, you can release the volume key but always leave usb plugged in until the download is complete.
Once the full download unplug usb and turn on the phone.
Done