How to Change iPhone Location | Spoof GPS Location on iPhone with Tenoshare iAnyGo (iOS 16 Supported)
How To Flash/Unbrick LG Mobile Devices Using Octoplus/Octopus Box
Forum rules
READ: GSM-Tutors Forum-Wide Rules and Regulations
READ: GSM-Tutors Forum-Wide Rules and Regulations
-
- Administrator
- Posts:1301
- Joined:Fri Jun 15, 2018 12:00 pm
- Location:Nigeria
- Donate:
- Has thanked: 6 times
- Been thanked: 104 times
- Status:Offline
- Contact:
This is a tutorial on how to Flash/Unbrick LG Mobile Devices Using Octoplus/Octopus Box.
WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.
Requirements:
After getting all the requirements (the above files), follow the rest of the steps below.
Step 1:
Download and install Octoplus/Octopus Box Setup.
Step 3:
Connect your Octopus Box & Launch the Octopus Box Setup from your PC.
Step 3:
Identify & Select the TAB where your LG Device belongs to (e.g LG Analog Devices, LG Infineon, LG Texas Instruments, LG Qualcomm, LG MTK, LG SEMC).
Step 4:
Select Firmware
Step 5:
Connect device using COM or USB Cable (the device will enter TAT Mode), Then Click on Write Firmware.
Step 6:
Wait for the device to be recognized and get connected. Once your device has been Connected, Patiently wait for the process to complete until it shows you Writing firmware done!
Follow the screenshots below or read the tutorials above
If this worked for you, use the thanks button!
WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.
Requirements:
- Octoplus/Octopus Box
- Octoplus/Octupus Box Setup: [ Please, Login to view this link]
- USB Cable or Box Connector USB
- And of course the Firmware of the LG Device you are about to flash
After getting all the requirements (the above files), follow the rest of the steps below.
Step 1:
Download and install Octoplus/Octopus Box Setup.
Step 3:
Connect your Octopus Box & Launch the Octopus Box Setup from your PC.
Step 3:
Identify & Select the TAB where your LG Device belongs to (e.g LG Analog Devices, LG Infineon, LG Texas Instruments, LG Qualcomm, LG MTK, LG SEMC).
Step 4:
Select Firmware
Step 5:
Connect device using COM or USB Cable (the device will enter TAT Mode), Then Click on Write Firmware.
Step 6:
Wait for the device to be recognized and get connected. Once your device has been Connected, Patiently wait for the process to complete until it shows you Writing firmware done!
Follow the screenshots below or read the tutorials above
If this worked for you, use the thanks button!
Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. | https://romshillzz.net
Avoid Spams in the forum to prevent banning the offending account. | https://romshillzz.net
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 11972 Views
-
Last post byRomShillzz
-
- 0 Replies
- 3802 Views
-
Last post byRomShillzz
-
- 0 Replies
- 3462 Views
-
Last post byRomShillzz
-
- 1 Replies
- 8340 Views
-
Last post by[email protected]
-
- 1 Replies
- 5452 Views
-
Last post byRomShillzz