Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

🔥 GSM-Tutors Forum VIP Section Now opened to all users!

Tecno L3 Flashed Successfully!

Here are sections for success stories in flashing firmware!
Post Reply
User avatar
Posts: 356
Joined: Fri Jun 15, 2018 12:00 pm
Location: Nigeria
Donate: Image
Has thanked: 6 times
Been thanked: 41 times
Status: Offline

Tecno L3 Flashed Successfully!


Post by RomShillzz » Thu Dec 06, 2018 8:56 am

Below is a guide on How To Flash Tecno L3 Successfully.

Device Info:
Name: Tecno
Model: L3
Chipset: MT6575
Android version: 4.1.1 (Jelly Bean)

Flashing will erase all of your data
All described operations you are doing at your own risk.

Tecno_L3_A351_20130813_V0_2_3: L3_A351_20130813_V0_2_3
Tecno_L3_A351_20130813_V0_2_3_DCC: L3_A351_20130813_V0_2_3_DCC
SP_Flash_Tool_v5.1724: [ Please, Login to view this link]
SP_Flash_Tool_v3.1304: [ Please, Login to view this link]

You can also use any SP Flash Tool v3.x (any version 3)

How To (Steps):
After getting all the requirements (the above files), follow the rest of the steps below.

Step 1:
  • Flash the 1st Scatter firmware (Tecno_L3_A351_20130813_V0_2_3) using SP Flash Too SP Flash Tool v5.1724, when you encounter a storage mismatch error, click here to fix: viewtopic.php?f=104&t=277
Step 2:
  • After fixing the storage mismatch error and the device doesn't work perfectly, Load the 2nd Scatter firmware with SP Flash Tool v3.1304 using only the Firmware -> Upgrade Option this time.
sp-flash-tool-v3-f-u.png (39.28 KiB) Viewed 112 times

Step 3:
After a successful flash, don't hard reset device, allow the device to boot up normally (it could take a couple of minutes). Once the device boots up, go to device Settings and perform a Factory data reset.

Note: You can connect the device using Vol up + Vol down button or Power button only.

If this worked for you, use the thanks button!

Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. | [ Please, Login to view this link]

Post Reply
  • Similar Topics
    Last post

Return to “Flashing Firmware”