Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

All Newly Registered Users Accounts awaiting approval (Inactive Users Account) have been Activated! You may now login with your credentials.

How To Flash/Unbrick LG Mobile Devices Using Octoplus/Octopus Box

Here are sections for success stories in flashing firmware!
Octoplus FRP Tool
Post Reply
User avatar
RomShillzz
Administrator
Administrator
Posts: 445
Joined: Fri Jun 15, 2018 12:00 pm
Location: Nigeria
Donate: Image
Has thanked: 6 times
Been thanked: 42 times
Status: Offline
Contact:
Nigeria

How To Flash/Unbrick LG Mobile Devices Using Octoplus/Octopus Box

#1

Post by RomShillzz » Sat Dec 08, 2018 10:54 pm

This is a tutorial on how to Flash/Unbrick LG Mobile Devices Using Octoplus/Octopus Box.

WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.


Requirements:
Octoplus/Octopus Box
Octoplus/Octupus Box Setup: [ Please, Login to view this link]
USB Cable or Box Connector USB
And of course the Firmware of the LG Device you are about to flash

How To (Steps):
After getting all the requirements (the above files), follow the rest of the steps below.

Step 1:
Download and install Octoplus/Octopus Box Setup.

Step 3:
Connect your Octopus Box & Launch the Octopus Box Setup from your PC.

Step 3:
Identify & Select the TAB where your LG Device belongs to (e.g LG Analog Devices, LG Infineon, LG Texas Instruments, LG Qualcomm, LG MTK, LG SEMC).

Step 4:
Select Firmware

Step 5:
Connect device using COM or USB Cable (the device will enter TAT Mode), Then Click on Write Firmware.

Step 6:
Wait for the device to be recognized and get connected. Once your device has been Connected, Patiently wait for the process to complete until it shows you Writing firmware done!


Follow the screenshots below or read the tutorials above

lg_write_firmware_1.png
lg_write_firmware_1.png (181.53 KiB) Viewed 116 times

lg_write_firmware_2.png
lg_write_firmware_2.png (182.96 KiB) Viewed 116 times

lg_write_firmware_3.png
lg_write_firmware_3.png (193.77 KiB) Viewed 116 times

lg_write_firmware_4.png
lg_write_firmware_4.png (255.38 KiB) Viewed 116 times

If this worked for you, use the thanks button!

Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. | [ Please, Login to view this link]



Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Flashing Firmware”