Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

ITEL A12 FLASHED DONE WITHOUT DOWNLOADING ANY FIRMWARE

Here are sections for success stories in flashing firmware!
Post Reply
User avatar
GSM GTECH
Moderator
Moderator
Posts: 10
Joined: Sun Jun 10, 2018 1:43 pm
Location: Malawi
Has thanked: 2 times
Been thanked: 1 time
Status: Offline
Malawi

ITEL A12 FLASHED DONE WITHOUT DOWNLOADING ANY FIRMWARE

Post by GSM GTECH » Mon Jul 16, 2018 2:17 pm


Requirements are miracle box v2.58, factory download tool and CM2..

First read flash from same itel that stuck on logo using cm2.Second convert that file into .pac There on cm2 aswell.Start flashing the phone using factory download tool,if operation stop while loading system file into the phone dont worry about that.If operation stoped then cancel factory tool then write flash using miracle boot 7731emmc...There on miracle untick all nv data files(3 files obsolutly) coz operation of flashing might not procceed..!! If done there in miracle the phone will just power on with black screen and contineuos vibration...

Then finally flash the .pac file u just converted using cm2..
NOTE..all above flashing process has to be done using .PAC file you just made.
When cm2 done then power on the phone...at this time it will boot succesfully with start up tone...then you are done.....all you needs is to repair imei...

Tested by GSM GTECH

Gsm Gtech

User avatar
Perkings7
Super Moderator
Super Moderator
Posts: 21
Joined: Mon Jun 11, 2018 7:42 am
Location: Cameroon
Has thanked: 4 times
Been thanked: 5 times
Status: Offline
Cameroon

Re: ITEL A12 FLASHED DONE WITHOUT DOWNLOADING ANY FIRMWARE

Post by Perkings7 » Mon Oct 22, 2018 6:09 am

GSM GTECH wrote:
Requirements are miracle box v2.58, factory download tool and CM2..

First read flash from same itel that stuck on logo using cm2.Second convert that file into .pac There on cm2 aswell.Start flashing the phone using factory download tool,if operation stop while loading system file into the phone dont worry about that.If operation stoped then cancel factory tool then write flash using miracle boot 7731emmc...There on miracle untick all nv data files(3 files obsolutly) coz operation of flashing might not procceed..!! If done there in miracle the phone will just power on with black screen and contineuos vibration...

Then finally flash the .pac file u just converted using cm2..
NOTE..all above flashing process has to be done using .PAC file you just made.
When cm2 done then power on the phone...at this time it will boot succesfully with start up tone...then you are done.....all you needs is to repair imei...

Tested by GSM GTECH
Anyone tried this yet?

Sent from my LGM-G600L using Tapatalk


Use Search Button to get Instant Results | Follow Forum Rules
Avoid Postings in wrong sections to prevent banning the offending account.


Post Reply

Return to “Flashing Firmware”