How to Change iPhone Location | Spoof GPS Location on iPhone with Tenoshare iAnyGo (iOS 16 Supported)
Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features
Forum rules
READ: GSM-Tutors Forum-Wide Rules and Regulations
READ: GSM-Tutors Forum-Wide Rules and Regulations
-
- Product Supporter
- Posts:39
- Joined:Mon Mar 18, 2019 3:04 pm
- Location:Australia
- Been thanked: 2 times
- Status:Offline
Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features
- Core
Protocol updated
Error handling, error explanation and hint module updated
- Service
NVM operations revized
DiagMode option activated ( Platform -> Control -> DiagMode )
> Change SW mode to diag, instead of flash. Do not require BootSelection.
Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !
New Identify option - device Platform, Device HW details identification
> Allow detect device SOC family, RAM amount for faster loader selection
> Work in DiagMode, Work ON MODERN and UNISOC chipset only !
- Flasher
Optimized flashing protocol
Optimized older device line support
NVManager updated - Identify, Backup, Security swap
NVManager Recovery tool updated
- Firmware Reader
Optimized structure identification
Activated "forced" reading. Option skip data verification.
> In case of semi-damaged devices, if backup atleast of something required
> In case of "Critical data damaged" errors
Optimized data verification during create FW
- Database:
SC983xx generic loader DB updated
SC9853i generic loader DB updated
SC7731E generic loader DB updated
SC7731x generic loader DB updated
SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
SC7731c/g loaders DB updated - various models and RAM size
SC9832E loaders DB updated - Meizu, Wiko
Some other various models with specific hw settings included in loader DB
- Other
Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
Bug fixes and changes according users requests
- Special thanks to respected Mr. gracy_elec
[ Please, Login to view this link]
- Core
Protocol updated
Error handling, error explanation and hint module updated
- Service
NVM operations revized
DiagMode option activated ( Platform -> Control -> DiagMode )
> Change SW mode to diag, instead of flash. Do not require BootSelection.
Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !
New Identify option - device Platform, Device HW details identification
> Allow detect device SOC family, RAM amount for faster loader selection
> Work in DiagMode, Work ON MODERN and UNISOC chipset only !
- Flasher
Optimized flashing protocol
Optimized older device line support
NVManager updated - Identify, Backup, Security swap
NVManager Recovery tool updated
- Firmware Reader
Optimized structure identification
Activated "forced" reading. Option skip data verification.
> In case of semi-damaged devices, if backup atleast of something required
> In case of "Critical data damaged" errors
Optimized data verification during create FW
- Database:
SC983xx generic loader DB updated
SC9853i generic loader DB updated
SC7731E generic loader DB updated
SC7731x generic loader DB updated
SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
SC7731c/g loaders DB updated - various models and RAM size
SC9832E loaders DB updated - Meizu, Wiko
Some other various models with specific hw settings included in loader DB
- Other
Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
Bug fixes and changes according users requests
- Special thanks to respected Mr. gracy_elec
[ Please, Login to view this link]
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 2936 Views
-
Last post byInfinity-Box
-
- 0 Replies
- 3257 Views
-
Last post byInfinity-Box
-
- 0 Replies
- 2968 Views
-
Last post byInfinity-Box
-
- 0 Replies
- 2941 Views
-
Last post byInfinity-Box
-
- 0 Replies
- 3116 Views
-
Last post byInfinity-Box