Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

How to Change iPhone Location | Spoof GPS Location on iPhone with Tenoshare iAnyGo (iOS 16 Supported)

User avatar

Topic Author
RomShillzz
Administrator
Administrator
Posts:1301
Joined:Fri Jun 15, 2018 12:00 pm
Location:Nigeria
Donate:Image
Has thanked: 6 times
Been thanked: 104 times
Status:Offline
Contact:
Nigeria
How To Fix Storage Type Mismatch (Scatter storage type EMMC | Target storage type NAND) In SP Flash Tool

#1

Unread post by RomShillzz » Fri Jul 26, 2019 7:08 pm

This is a tutorial on how to fix storage type mismatch (scatter storage type EMMC | target storage type NAND) when flashing firmware using SP Flash Tool.

storage-type-mismatch-emmc-nand.png
storage-type-mismatch-emmc-nand.png (101.8KiB)Viewed 14621 times

Have you gotten an error while flashing a firmware using SP Flash Tool as shown on the image above or code below?

Code: Select all

Storage type mismatch!
scatter storage type is HW_STORAGE_EMMC
target storage type is  HW_STORAGE_NAND
If Yes, then in this tutorial I'll be showing you how to fix this error.

WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.


Requirements:
  • SP Flash Tool:
How To (Steps):
After getting the above requirement, Install Notepad++ and follow the steps below.

Step 1:
  • Right-click on the firmware scatter file and open with Notepad++.
1.png
1.png (84.55KiB)Viewed 14621 times

Step 2:
  • Press CTRL+ F and search for the value "EMMC" (without the quotes).
2.png
2.png (87.55KiB)Viewed 14621 times

Step 3:
  • Rename all the EMMC to NAND.
3.png
3.png (95.44KiB)Viewed 14621 times

Step 4:
  • After renaming,
4.png
4.png (90.46KiB)Viewed 14621 times
  • Click on File and save the scatter file (you can also save the file using CTRL + S).
4b.png
4b.png (52.6KiB)Viewed 14621 times

Step 5:
  • Launch SP Flash Tool and select the scatter file again. Now the EMMC Scatter storage type has been successfully changed to NAND! You can now flash your device.
5.png
5.png (89.94KiB)Viewed 14621 times




You Might Also Like:
How To Fix Storage Type Mismatch (Scatter storage type EMMC | Target storage type NONE) In SP Flash Tool: viewtopic.php?f=104&t=277


If this worked for you, use the thanks button!



Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. | https://romshillzz.net


Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Other Success Stories”