How To Fix Storage Type Mismatch (Scatter storage type EMMC | Target storage type NAND) In SP Flash Tool

[RomShillzz]

This is a tutorial on how to fix storage type mismatch (scatter storage type EMMC | target storage type NAND) when flashing firmware using SP Flash Tool.

storage-type-mismatch-emmc-nand.png (101.8 KiB) Viewed 9108 times

Have you gotten an error while flashing a firmware using SP Flash Tool as shown on the image above or code below?

Code: Select all

Storage type mismatch!
scatter storage type is HW_STORAGE_EMMC
target storage type is  HW_STORAGE_NAND

If Yes, then in this tutorial I'll be showing you how to fix this error.

WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.

Requirements:

• SP Flash Tool:

• Notepad++: http://optitopt.com/396y

How To (Steps):
After getting the above requirement, Install Notepad++ and follow the steps below.

Step 1:

• Right-click on the firmware scatter file and open with Notepad++.

1.png (84.55 KiB) Viewed 9108 times

Step 2:

• Press CTRL+ F and search for the value "EMMC" (without the quotes).

2.png (87.55 KiB) Viewed 9108 times

Step 3:

• Rename all the EMMC to NAND.

3.png (95.44 KiB) Viewed 9108 times

Step 4:

• After renaming,

4.png (90.46 KiB) Viewed 9108 times

• Click on File and save the scatter file (you can also save the file using CTRL + S).

4b.png (52.6 KiB) Viewed 9108 times

Step 5:

• Launch SP Flash Tool and select the scatter file again. Now the EMMC Scatter storage type has been successfully changed to NAND! You can now flash your device.

5.png (89.94 KiB) Viewed 9108 times

You Might Also Like:
How To Fix Storage Type Mismatch (Scatter storage type EMMC | Target storage type NONE) In SP Flash Tool: viewtopic.php?f=104&t=277


If this worked for you, use the thanks button!