Page 1 of 1

How To Generate Checksum.ini File in MTK Android Firmware (Scatter File)

Posted: Thu Jul 11, 2019 12:15 pm
by RomShillzz
This is a tutorial on How To Generate Checksum.ini File in MTK Android Firmware (Scatter File).

Requirements:
CheckSum Generate Tool: viewtopic.php?f=59&t=796

How To (Steps):
After getting the above requirement, follow the steps below.

Step 1:
  • Download and Exttract the CheckSum Generate Tool.
checksum-generate-tool.png
checksum-generate-tool.png (34.53 KiB) Viewed 27 times

Step 2:
  • Copy the files in the CheckSum Generate Tool to the folder of your Firmware.
checksum-generate-tool-copy.png
checksum-generate-tool-copy.png (90.35 KiB) Viewed 27 times
checksum-generate-tool-in-firmware-folder.png
checksum-generate-tool-in-firmware-folder.png (59.33 KiB) Viewed 27 times

Step 3:
  • Run CheckSum_Gen.exe
checksum-generate-tool-launch.png
checksum-generate-tool-launch.png (63.89 KiB) Viewed 27 times

Step 4:
  • Patiently wait for the checksum.ini file to generate. Once the process is completed, you will get the following message;

Code: Select all

Write ini to: .\Checksum.ini
Press any key to continue...
checksum-generate-tool-checksum-generated.png
checksum-generate-tool-checksum-generated.png (42.47 KiB) Viewed 27 times




If this worked for you, use the thanks button!