How To Generate Checksum.ini File in MTK Android Firmware (Scatter File)
Posted: Thu Jul 11, 2019 12:15 pm
This is a tutorial on How To Generate Checksum.ini File in MTK Android Firmware (Scatter File).
Requirements:
After getting the above requirement, follow the steps below.
Step 1:
Step 2:
Step 3:
Step 4:
If this worked for you, use the thanks button!
Requirements:
- CheckSum Generate Tool: viewtopic.php?f=59&t=796
After getting the above requirement, follow the steps below.
Step 1:
- Download and Exttract the CheckSum Generate Tool.
- checksum-generate-tool.png (34.53KiB)Viewed 11963 times
Step 2:
- Copy the files in the CheckSum Generate Tool to the folder of your Firmware.
- checksum-generate-tool-copy.png (90.35KiB)Viewed 11963 times
- checksum-generate-tool-in-firmware-folder.png (59.33KiB)Viewed 11963 times
Step 3:
- Run CheckSum_Gen.exe
- checksum-generate-tool-launch.png (63.89KiB)Viewed 11963 times
Step 4:
- Patiently wait for the checksum.ini file to generate. Once the process is completed, you will get the following message;
Code: Select all
Write ini to: .\Checksum.ini
Press any key to continue...- checksum-generate-tool-checksum-generated.png (42.47KiB)Viewed 11963 times
If this worked for you, use the thanks button!