How To Generate Checksum.ini File in MTK Android Firmware (Scatter File)
Posted: Thu Jul 11, 2019 12:15 pm
This is a tutorial on How To Generate Checksum.ini File in MTK Android Firmware (Scatter File).
Requirements:
After getting the above requirement, follow the steps below.
Step 1:
Step 2:
Step 3:
Step 4:
If this worked for you, use the thanks button!
Requirements:
- CheckSum Generate Tool: viewtopic.php?f=59&t=796
After getting the above requirement, follow the steps below.
Step 1:
- Download and Exttract the CheckSum Generate Tool.
Step 2:
- Copy the files in the CheckSum Generate Tool to the folder of your Firmware.
Step 3:
- Run CheckSum_Gen.exe
Step 4:
- Patiently wait for the checksum.ini file to generate. Once the process is completed, you will get the following message;
Code: Select all
Write ini to: .\Checksum.ini
Press any key to continue...
If this worked for you, use the thanks button!