Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

How to Change iPhone Location | Spoof GPS Location on iPhone with Tenoshare iAnyGo (iOS 16 Supported)

Coolsand Error ID: 200 Solution!!

Post any other success stories here including hardware.
AE Toool Dongle
Post Reply
User avatar

Topic Author
Posts: 1300
Joined: Fri Jun 15, 2018 12:00 pm
Location: Nigeria
Donate: Image
Has thanked: 6 times
Been thanked: 102 times
Status: Offline

Coolsand Error ID: 200 Solution!!


Unread post by RomShillzz » Sun Jul 08, 2018 9:59 am

Have you tried unlocking/formatting a Coolsand device using Miracle Box and at the process you got an error ID: 200 (Connect to Mobile phone error. ID: 200)? Here is the solution on how to fix Coolsand Error ID: 200.
Although all Coolsand error can be solved using Infinity Box Dongle Chines Miracle 2 (CM2) But this is for Miracle Box users.

Flashing/Unlocking/Formatting will erase all of your data
All described operations you are doing at your own risk.

  • Miracle Box Crack v2.58: [ Please, Login to view this link]
How To (Steps):
After getting all the requirements, follow this tutorial I have made on How To Flash & Unlock Coolsand Feature Phones (Basic Phones). After following the above tutorial and you encounter this error Connect to Mobile phone error. ID: 200, do the following:
  • Install the Coolsand (RDA) driver provided above.
  • After installation, Restart your Computer (Recommended but not Compulsory).
  • Launch Miracle Box (Tested on the Miracle Box Crack version provided above).
  • Follow the tutorial (How To Flash & Unlock Coolsand Feature Phones (Basic Phones)) again, this time around when it shows the error, click on the Start button, disconnect device (but don't allow the deceive to switch off or to disconnect from the "Open USB Download" Mode) and reconnect immediately.
Note: Time interval for disconnecting and reconnecting the device shouldn't go beyond 2-3 secs, so you have to be fast on this.

After following the above steps accordingly, you should be able to get a successful result!

Coolsand error id 200 done!!.png
Coolsand error id 200 done!!.png (194.57 KiB) Viewed 4363 times

If this worked for you, use the thanks button!

Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. | https://romshillzz.net

Registered User
Posts: 2
Joined: Tue Dec 17, 2019 9:24 am
Location: Kenya
Status: Offline

Re: Coolsand Error ID: 200 Solution!!


Unread post by siroartz » Tue Nov 17, 2020 11:27 pm

You are the BEST ever... this WORKED 100000....% Tested by SirReal Gsm Developer

Post Reply
  • Similar Topics
    Last post

Return to “Other Success Stories”