Welcome to the GSM-Tutors Forum!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members, search our boards or view our download links. Registration is fast, simple and absolutely free so please - Register

If you have any problems with the registration process or your account login, please read this forum.

We are here for you! Please Ask a Question 📢
User avatar
Posts: 611
Joined: Fri Jun 15, 2018 12:00 pm
Location: Nigeria
Donate: Image
Has thanked: 6 times
Been thanked: 49 times
Status: Offline

How to make a PC detect a Dead or Hard Bricked SPD (Spreadtrum) Device using RSTP Method


Unread post by RomShillzz » Thu Dec 06, 2018 2:10 pm

This is a tutorial on How to make a PC detect a Dead or Hard Bricked SPD (Spreadtrum) Device using RSTP Method. If you flashed an SPD device and it's no longer been detected by your Computer? Here's a fix.

Please Note: SPD Devices don't easily or totally die that way - ( Personification ;) ).

Make sure you have properly installed Spreadtrum (SPD) drivers in your Computer.

How To (Steps):
➜ Launch any Tool, Box or Dongle that supports the SPD device (or the tool you want to use)
➜ Load the firmware
➜ Click on the start button
➜ Hold Vol up + Vol down (the boot key)
➜ Plug / Connect the USB cable, then insert the battery to the device.

Now, the device should connect and be detected by your PC.

Flashing will erase all of your data
All described operations you are doing at your own risk.

This method is called RomShillzz Spreadtrum Test Point (RSTP).

If this worked for you, use the thanks button!

Use Search Button to get Instant Results | Follow Forum Rules
Avoid Spams in the forum to prevent banning the offending account. | https://romshillzz.net

Post Reply
  • Similar Topics
    Last post

Return to “Other Success Stories”