Page 1 of 1

How To Fix Storage Type Mismatch In SP Flash Tool

Posted: Tue Dec 04, 2018 7:39 am
by RomShillzz
This is a tutorial on how to fix storage type mismatch when flashing firmware using SP Flash Tool.

storage_mismatch!.png
storage_mismatch!.png (86.45 KiB) Viewed 2055 times

Have you gotten an error while flashing a firmware using SP Flash Tool as shown in the image above or code below?

Code: Select all

Storage type mismatch!
scatter storage type is HW_STORAGE_EMMC
target storage type is  HW_STORAGE_NONE
If Yes, then in this tutorial I'll be showing you how to fix this error.

WARNING!
Flashing will erase all of your data
All described operations you are doing at your own risk.


Requirements: How To (Steps):
After getting the above requirement, follow the steps below.

Step 1:
  • Launch SP Flash v3.xx.
1.png
1.png (21.61 KiB) Viewed 2055 times

Step 2:
  • Select the scatter file.
2.png
2.png (24.73 KiB) Viewed 2055 times
3.png
3.png (43.97 KiB) Viewed 2055 times

Step 3:
  • Click on format.
4.png
4.png (27.99 KiB) Viewed 2055 times

Step 4:
  • Select Auto Format Flash > Format whole flash then click ok and connect device.
5.png
5.png (30.21 KiB) Viewed 2055 times

Step 5:
  • After a successful format, click on Download, when you get the Download Warning prompt, click Yes & connect the device.
6.png
6.png (38.17 KiB) Viewed 2055 times




You Might Also Like:
How To Fix Storage Type Mismatch (Scatter storage type EMMC | Target storage type NAND) In SP Flash Tool: viewtopic.php?f=104&t=907


If this worked for you, use the thanks button!

Re: How To Fix Storage Type Mismatch In SP Flash Tool

Posted: Sun Mar 17, 2019 8:25 am
by sicomputer
sp flash tool 3xx download link did not work, Please update link

Re: How To Fix Storage Type Mismatch In SP Flash Tool

Posted: Sun Mar 17, 2019 9:11 am
by RomShillzz
sicomputer wrote:
Sun Mar 17, 2019 8:25 am
sp flash tool 3xx download link did not work, Please update link
Thank you for your feedback, I'll update the link soon.