How To Create FRP Reset File For All Spreadtrum (SPD) Android Devices
Posted: Wed Jun 24, 2020 7:42 pm
This is a tutorial on How To Create FRP Reset File For All Spreadtrum (SPD) Android Devices. Creating an FRP Reset File for your Spreadtrum (SP) Android Device helps you remove and bypass FRP without having to flash the firmware of the device completely.
Requirements:
After getting the above requirements, follow the steps below.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Click on Packet.
Step 7:
Step 8:
Step 9:
Step 10:
Step 11:
Step 12:
If this worked for you, use the thanks button!
Requirements:
- Firmware of the Spreadtrum Android Device: https://romshillzz.net
- SPD Research Download Tool:
After getting the above requirements, follow the steps below.
Step 1:
- Launch ResearchDownload Tool.
Step 2:
- Click on Load packet.
Step 3:
- Select the PAC firmware.
Step 4:
- Click on Settings.
Step 5:
- On the Main Page, you will see the partitions available in the PAC file.
Step 6:
- Uncheck all the partitions leaving only the following:
Code: Select all
FDL1
FDL2
USERDATA
Cache
EraseMics - (optional)
Persist
UBOOT_LOADER
Click on Packet.
Step 7:
- You will get a prompt asking "Do packet operation right now?" Click Yes.
Step 8:
- You will get a Download warning prompt about some of the partitions which have been unchecked, Click Yes.
Step 9:
- Enter the Product Version (any name you would like to save the FRP file as), Then choose the Saving Path.
Step 10:
- Save file in the Path you have chosed.
Step 11:
- After setting the Product Version and Saving Path, Click OK.
Step 12:
- Condratulations! You have successfully created and FRP Reset File for your Spreadtrum (SPD) Android Device.
If this worked for you, use the thanks button!